Global Aviation

<%@LANGUAGE="VBSCRIPT" CODEPAGE="1252"%> <% Dim rsSwiperSub Dim rsSwiperSub_numRows Set rsSwiperSub = Server.CreateObject("ADODB.Recordset") rsSwiperSub.ActiveConnection = MM_dbase1_STRING rsSwiperSub.Source = "SELECT * FROM QueryProductDetails" rsSwiperSub.CursorType = 0 rsSwiperSub.CursorLocation = 2 rsSwiperSub.LockType = 1 rsSwiperSub.Open() rsSwiperSub_numRows = 0 %> <% Dim rsSwiperMain Dim rsSwiperMain_numRows Set rsSwiperMain = Server.CreateObject("ADODB.Recordset") rsSwiperMain.ActiveConnection = MM_dbase1_STRING rsSwiperMain.Source = "SELECT * FROM QueryDistinctCategory" rsSwiperMain.CursorType = 0 rsSwiperMain.CursorLocation = 2 rsSwiperMain.LockType = 1 rsSwiperMain.Open() rsSwiperMain_numRows = 0 %> <% Dim localTime Dim localTime_numRows Set localTime = Server.CreateObject("ADODB.Recordset") localTime.ActiveConnection = MM_dbase1_STRING localTime.Source = "SELECT * FROM QueryTimeDate" localTime.CursorType = 0 localTime.CursorLocation = 2 localTime.LockType = 1 localTime.Open() localTime_numRows = 0 %> <% Dim productInfo__MMColParam productInfo__MMColParam = "1" If (Request.QueryString("productInfoID") <> "") Then productInfo__MMColParam = Request.QueryString("productInfoID") End If %> <% Dim productInfo Dim productInfo_numRows Set productInfo = Server.CreateObject("ADODB.Recordset") productInfo.ActiveConnection = MM_dbase1_STRING productInfo.Source = "SELECT * FROM QueryProductInfo WHERE productInfoID = " + Replace(productInfo__MMColParam, "'", "''") + "" productInfo.CursorType = 0 productInfo.CursorLocation = 2 productInfo.LockType = 1 productInfo.Open() productInfo_numRows = 0 %> Global Aviation

Global Aviation Support Pty. Ltd

Sunshine Coast Airport, Queensland, Australia
Tel: 07 5448 8877 Fax: 07 5448 8866
Email:

Local Time - <%= DoDateTime((localTime.Fields.Item("Time").Value), 4, 1033) %>, <%= DoDateTime((localTime.Fields.Item("Date").Value), 1, 1033) %>

< Go back

Return to Home Page

1¼" Electronic Instruments

Pressure gauges
Temperature gauges
Fuel quantity indicator
Voltmeter
Flap position indicator
Ammeter
Mounting information

1¼" Pressure Gauges

Available for fuel, oil, and water pressure. Designed to operate on a 14 or 28 V DC system. Each sense with a remote mounted transducer. Ranges available from 15 to 130 PSI.

Accuracy: ± 5 PSI (w/ standard transducer)
± 3 % full scale (w/ precision transducer)

Two different transducers are available:
Standard (1EX) or Precision (1EXXX)

Weight: 4.2 oz.
Case: Aluminium

Oil pressure	Fuel pressure	Water pressure	Hydraulic pressure
4-221-080 0-80 PSI B & W 1E1 (VDO)	4-321-015 0-15 PSI B & W 1E3 (VDO)	4-421-015 0-15 PSI B & W 1E3 (VDO)	4-520-2K 0-2000 PSI B & W 1E2K (precision)
4-221-130 0-130 PSI B & W 1E2 (VDO)	4-321-030 0-30 PSI B & W 1E3 (VDO)	4-421-030 0-30 PSI B & W 1E3 (VDO)
4-222-100 0-100 PSI B & W 1E100 (precision)	4-321-050 0-50 PSI B & W 1E1 (VDO)
	4-321-080 0-80 PSI B & W 1E1 (VDO)
. B & W - black and white dial . Call if you're looking for a range not on the list . Color markings are available for an additional fee

Page top

1¼" Temperature Gauges

Electronic fuel, oil, and water pressure instruments. Designed to operate on a 14 or 28 V DC system. Each sense with a remote mounted transducer. Ranges available from 15 to 130 PSI.

Accuracy:
   ± 5° F for thermistor probe
   ± 20° F for J thermocouple probe @ 75° F
   ± 50° F for K thermocouple probe @ 75° F

Weight: 4.2 oz.
Case: Aluminum

Oil temperature	Water temperature	Cylinder temperature	Exhaust gas temperature
12-231-300F 100-300 °F 1BX (thermistor	12-331-300F 100-300 °F 1BX (thermistor)	12-431-300F 100-300 °F 1BX (thermistor)	12-531-1K7 700-1700 °F 2B2X (K thermocouple)
12-231-300V 100-300 °F VDO (thermistor)	12-331-300V 100-300 °F VDO (thermistor)	12-431-300V 100-300 °F VDO (thermistor)	12-531-900C 100-900 °C 2B2X (K thermocouple)
12-231-150C 40-150 °C 1BX (thermistor)	12-331-150C 40-150 °C 1BX (thermistor)	12-431-150C 40-150 °C 1BX (thermistor)
		12-431-600F 100-600 °F 2B1X (J thermocouple)
		12-431-300C 50-300 °C 2B1X (J thermocouple)
All have B & W (black and white) dials standard Range markings are available upon request

Page top

1¼" Electronic Fuel Quantity Indicator

Electronic Fuel Quantity Indicator to use a tank mounted sensor. Designed to operate on a 14 or 28 V DC system. Indicator models available for float type or capacitance type sensors.

You can choose from two different dial configurations:
1. full sweep (270°) dial as shown in picture.
2. half sweep (180°) dial has full mark straight up and empty straight down.

Weight: 4.2 oz.
Case: Aluminium

18-110-1C1 270° Empty to Full 0 - 5V	18-110-2C1 180° Empty to Full 0 - 5V	18-110-1F1 270° Empty to Full 240 - 30 ohms
18-110-1F2 270° Empty to Full 0 - 30 ohms	18-110-1F3 270° Empty to Full 0 - 90 ohms	18-110-1F4 270° Empty to Full 78 - 6 ohms
All have B & W (black and white) dials standard Range markings are available upon request

Page top

1¼" Electronic Voltmeter

Electronic DC voltmeter designed for 14 or 28 V DC system.

Weight: 4.2 oz.
Case: Aluminum

14-110-14 9-17 V DC	14-110-28 20-32 V DC
All have B & W (black and white) dials standard Range markings are available upon request

Page top

1¼" Electronic Flap Position Indicator

Electronic flap position indicator to use our remote mounted transducer. Designed to operate on a 14 or 28 V DC system. Several different ranges are available.

Weight: 4.2 oz.
Case: Aluminium

9-110-40 0-40 ° 1H1	9-110-U/F Up to Full 1H1
All have B & W (black and white) dials standard Range markings are available upon request

Page top

1¼" Electronic Ammeter

The electronic ammeter has an aircore meter and a full sweep dial and is designed for a 14 or 28 V DC system. This ammeter uses an external shunt for sensing current.

Weight: 4.2 oz.
Case: Aluminum

15-110-30 -30 +30 amps 1C1	15-110-60 -60 +60 amps 1C2	15-110-80 -80 +80 amps 1C3	15-110-100 -100 +100 amps 1C4
All have B & W (black and white) dials standard Range markings are available upon request

Page top

1 ¼" Electronic Mounting Information

Sunsite Web Design

Disclaimer

<% rsSwiperSub.Close() Set rsSwiperSub = Nothing %> <% rsSwiperMain.Close() Set rsSwiperMain = Nothing %> <% localTime.Close() Set localTime = Nothing %> <% productInfo.Close() Set productInfo = Nothing %>